Skunuv technology 10 years focused on R & D and production of UV series productsEnglish
Allows you to save time, effort and worry, service hotline: 0755-28995058
 
TEL:(+86)0755-28995058
    (+86)0755-89648039
    (+86)0755-28996592
FAX:(+86)0755-89648039
E-MAIL:xhuv2006@163.com
您现在的位置:Home > News >

The UV curing machine ventilation system common sense

时间:2016-04-13 18:27来源:sankun点击:
  With the development of economy, the uv curing machine widely used in industrial field, so how much do you know about its ventilation system? Below by specialized good three technology in detail for you.
 The ventilation system of the uv curing machine by fan, air ducts, get together the wind shield. That we should pay attention to when the choose and buy what item? The three elements of the key is the choice of the fan, air volume control and exhaust.
 1, choose according to the UV lamp power of the fan and the actual situation of housing space. General distribution and two wind turbine wind, but there are only equipped with a wind fan. Fan of the uv curing machine power is not enough, not enough leads to exhaust air temperature inside the case, lamp life shortened, melt, even also make curing product quality difficult to guarantee; Air volume of fan power if too large, will make the temperature inside the case is too low, the UV lamp can not work at full power, curing is not easy to dry.
 2, air volume control refers to the uv curing machine volume should be adjustable. This is because want to consider the summer and winter temperature difference is very big, many factories do not have a constant temperature workshop, so if the UV curing devices with the same air in winter and summer work will affect the quality of the products. Usually use the method of temperature control to control two fan, reaches a certain temperature is automatically restart a fan, to reach a certain temperature and then start another fan, and shifting is set on the exhaust and the air inlet valve to control the intake and exhaust air volume.
  3, exhaust way refers to take the lead wind supply air or air supply on the wind, etc. But either way, not the wind blows directly to the UV lamp, because the consequences of doing so is to make the UV lamp for heat loss is too big and not full power work (changed from white to not dazzling light blue), make the ink doesn't dry.
  Above is we buy the uv curing machine, check the ventilation system of the matters needing attention, to understand this, the choose and buy a satisfactory uv curing machine, sankun technology uv curing machine has better quality cheaper price, welcome to buy! More high quality products are: oven, industrial oven, spraying machine, screen printing machine, dryer and coating equipment

TAG:UV machine(101)UV fault(3)