Proper use of uv machine and matters needing attention

                             The correct way of using the uv machine and matters needing attention

UV machine method of use:

  The power cord plugged into a power supply correctly.
  Open the brake switch, the power light is lit up, press the power button again, to see whether the machine is in standby mode.
  Switch on the UV machine, mesh belt running, according to the requirement of the product, please adjust speed control knob, allow the running speed of net belt to appropriate levels
  Start A lamp, waiting for A lamp current dropped to A stable state and start lamp of B or C lamp. Prevent the power switch over current.
  Need to be closed when the uv lamp, according to A stop light, B lamp fan carries on, after the stop button to heat, ultraviolet lamp tubes after cooling, such as automatic cut off the switchboard power supply.
  Power supply starts if long time don't turn on the light, the device will automatically cut off the switchboard power supply.
  After turn off the lights and immediately start the uv lamp, not light belongs to the normal phenomenon, after waiting for the uv lamp cooling can light up.
  After replace the uv lamp, open the box, unscrew the electric box fastening screws, pull a light box for conversion.

Need to pay attention to the items:

 Good ground wire is grounded.