Uv light curing machine maintenance knowledge

  Maintenance of uv light curing machine is analysed what is knowledge?
  Uv light curing machine maintenance knowledge is analysed uv light curing machine maintenance is mainly divided into daily maintenance quarter, monthly maintenance and maintenance of three large,By sankun technology for everybody below on uv light curing machine maintenance of common sense:
  Daily maintenance: uv light curing machine daily maintenance refers to the daily work of maintenance, daily maintenance is divided into the following:
  1, check whether the fan, motor running normally, with or without abnormal sound, if there is any abnormal sound immediately shut off the uv light curing machine overhaul maintenance notice.
  2, turn on the light after checking whether the uv lamp is lit, if found to have not lit, notify the machine maintenance.
  Monthly maintenance: uv light curing machine maintenance refers to do regular check every month and maintenance, monthly maintenance is divided into the following:
  1, check the uv light curing machine vents are blocked, and clean up the dust.
  2, check whether the uv lamp current is normal, the line is aging.
  3, check whether the fan, motor running normally, motor speed can meet the job requirements.
  4, check whether the transmission facilities in good condition, and cheer cheer for drive chain and sprocket.
  5, uv lamp light intensity is also can reach the standard work, lamp whether ageing.
  6, dust cleaning the uv machine lumen.
  Quarterly maintenance uv light curing machine, quarterly maintenance refers to each quarter regular inspection and maintenance of uv light curing machine, quarterly maintenance is divided into the following:
  1, check the uv light curing machine line and switch is normal.
  2, motor gearbox.
  3, check whether the transformer is normal work, transformer insulation not less than 5 ohms, such as short of, must put the transformer dry again.
  4, reflectors with clean soft cloth dipped in alcohol.
  5, check whether there is any looseness on uv light curing machine transmission shaft, wheel, two chain wheel is vertical.
  6, mesh belt firmness. Uv light curing machine can do maintenance increases the life span of the machine is usually a good machine maintenance refers to the daily operation of the machine to take good care of prohibited wild operation, correct switch machine, equipment, and equipped with stable voltage when the uv light curing machine shall immediately stop operation when an exception occurs, contact the manufacturer or professional personage to repair.