Sunkun Technology Service hotline  
您现在的位置:Home > Support

UV machine maintenance method and the scope of application

时间:2016-04-17 15:19来源:sankun点击:
Soft hard, flat membrane switch type low temperature curing ink UV light solid machine maintenance method and the scope of application
  1. The maintenance method
  The daily maintenance
1). Need to clean the surface of UV light solid machine daily, to keep the body surface clean.
2) when you start the machine, to check whether the fan, motor running normally, whether there is abnormal sound, if there is abnormal sound should be immediately shut off the machine and inform the maintenance technician for maintenance.
3). After turn on the light to check whether the UV lamp has been lit, if found to have the light not bright, then notify the mechanic for repair.
  Monthly maintenance
1). Check the vents have blocked and clean dust.
2). Check whether the lamp current is normal, the line has no aging. If there is any line aging, notify the maintenance personnel for processing.
3) check whether the fan, motor running normally, motor speed can meet the job requirements.
4). Whether the drive chain and sprocket, if not you need to go.
5). The UV lamp light intensity is also can reach the standard work, lamp whether ageing.
6). Cleaning the dust in the body cavity.
  Half a year to maintain
1) check the line of UV light solid machine and switch is normal.
2.) if motor gearbox refueling.
3). Transformer insulation not less than 5 ohms, if not reach, then you must put the transformer dry again.
4). Reflectors with clean soft cloth dipped in alcohol.
5). The transmission shaft, wheel without loose.
6). Net belt firmness.

2. The scope of application: flexible thin film of membrane switch, hard membrane switch, switch, convex membrane switch UV curing ink

TAG:UV machine(101)