Sunkun Technology Service hotline  
(+86)0755-28995058 
 
Tel:(+86)0755-28995058
Fax:(+86)0755-89648039
E-MAIL:xhuv2006@163.com
Location:Home > News

UV adhesive curing standard sankun touch screen

Time:2016-04-19 09:22Source:sankunClick: Number

Sankun touch screen UV adhesive curing standard science and technology

  Touch screen UV glue curing standards are usually based on UV energy value measured by (mj/cm2), actually this is not accurate. As we all know the sun's rays is ultraviolet (UV), as well as energy (summer outdoor maximum 3.5 mw/cm2 at noon of UV light intensity), can also with UV high pressure mercury lamp can achieve the same value, but at the same energy of the sun's rays are no substitute for UV high pressure mercury lamp, the reason is that the sun's ultraviolet intensity (mw/cm2) is too weak, the lack of penetration. Can be seen from the UV curing glue can not only see the UV energy, UV glue under different intensity of UV curing energy value is different, the stronger curing UV ultraviolet glue when the less energy is needed to, on the contrary the lower the intensity of the ultraviolet energy needed for the more, the intensity of the ultraviolet low even more energy cannot make the UV glue solidified completely.
  Different kinds of UV glue for UV lamp types of requirements are different, more commonly used is the UV metal halogen lamp (hereinafter referred to as the halogen lamp) and UV high pressure mercury lamp (hereinafter referred to as the mercury lamp), they all UV peak values differ (see chart), main peak is 365 nm mercury lamp, halogen lamp, the main peak is 365 nm, 380 nm. UV glue is a kind of modified acrylic resin structural adhesive, UV adhesive curing principle is light initiator of UV curing materials (or photosensitizer) under the irradiation of ultraviolet absorption after UV reactive free radicals or cationic monomer polymerization by, crosslinking and the chemical reaction, make its in seconds from liquid into solid. Light the play a key role of the initiator, different light initiator on the wavelength of ultraviolet radiation sensitivity is not the same, halogen lamps with double primary wave, so it's suitable for wider than mercury lamp. In mercury lamp and halogen lamp under the condition of same energy halogen effect more apparent than mercury lamp, they are not simple comparison on energy.
And there's a little glass cover, PC, PET and UV transmittance of polaroid has difference, will affect the UV glue ultimately curing effect.
  So just use energy to measure whether the UV glue solidified completely is a myth, what should be integrated in the use of cover plate using what type of UV lamp, light intensity is the range of energy to make the UV glue solidified completely, the key is to test for a cured product, energy is only a reference, not absolute.
Focusing on the touch screen UV glue curing full range of solutions
The above standard from shenzhen sankun technology co., LTD. HTTP: / / http://www.skunuv.com/
 
  The following is a touch screen UV curing glue series products
  Product name: touch screen procuring UV machine
  Capacitance screen UV light curing machine special used in procuring capacitance screen industry, used for glass and glass, UV machine this paragraph has been successfully used in the industries of capacitance screen, with its stable performance, light curing of high efficiency, can according to your capacity and the actual process for you to create a high standard, high performance, high output of UV machine
To adapt to the range:
  Capacitance screen, touch screen, LCD, LCD glass; Monitor, tablet PC, mobile phone touch screen, electronic products, such as drying line
Product features:
1. Imported UV lamp, low power consumption, long life;
2. May be procuring glass and glass bonding positioning;
3. The installation is convenient, the clamshell door type, maintenance is convenient;
4. Teflon weather resistant, wear resistant conveyor belt;
5. Using cold light lamp with cold wind cooling;
6. The operation is simple;
7. The control mode optional: button and PLC/HMI touch screen
Capacitive touch screen procuring UV curing machine
Product name: procuring UV curing machine
Product model: SK - 320
  Applicable scope: all kinds of curing of the screen, with mobile phones, tablet PC capacitive touch water adhesive curing.
  Product features:
1. Imported UV lamp, low power consumption, long life;
The UV lamp power: 320 w (40 w * 8)
2. May be procuring glass and glass bonding positioning;
3. The installation is convenient, the clamshell door type, maintenance is convenient;
4. Teflon weather resistant, wear resistant conveyor belt;
5. Using cold light lamp with cold wind cooling;
6. The operation is simple;
7. The control mode: button, light, start, speed regulation
8. Transmission bandwidth: 400 mm
Conveyor belt speed: 1-5 m/min
9. The power supply wiring: AC 220 v, 50 hz
Capacitive touch screen for intelligent automatic UV machine
Product name: intelligent automatic UV machine
Dp. Product model: SK - 206-206
To adapt to the range:
PLC touch screen, capacitive touch screen (CTP), tablet PC, car touch, mobile phone keys, virtual buttons, computer keys, optical lenses, film, resistive touch screens UV curing glue, high energy, strong specular touch-screen intelligent automatic UV machine
Performance characteristics:
Cold light source type UV light curing machine;
Double light high strength light preparation;
In the capacitance screen industry mature application, one-time cure, high efficiency;
Strong stability; Shandong light and other characteristics; When power up to 4000 mj/cm2 product table machine temperature less than 55 degrees;
PLC automatic control: the UV lamp, light stress section, conveying speed regulation; Failure to remind;
Intelligent automation degree is high; Is the first choice for high-end capacitive touch screen one of UV light curing machine;
Technical parameters:
UV high strength light: 6 kw * 2 PCS
Light irradiation (effective width) : 300 mm;
The UV lamp is apart from the conveyer belt distance is adjustable: 50-150 - mm
The UV lamp power density: 150 w/CM
The UV light intensity is adjustable: 50%; 100%;
Reflector: cold reflect a chimney, high efficiency, long service life, effective prevention of heat;
Conveyor width: 400 mm;
Conveyor belt material: teflon long wangdai;
Conveyor speed: 1-10 meters and infinitely adjustable;
The machine set up automatic delay shutdown functions;
Knurling roller: surface, to ensure smooth delivery;
The engine cooling: air cooling and optical cooling;
The machine material: table machine manufacture plastic spraying;
Appearance: white with black and white plastic spraying computer;
The machine specification: 2000 * 1550 * 750 w l HMM
Power supply connection: three-phase five line 380 vac 50 hz
Touch screen water-binder special UV curing machine
Product name: water adhesive curing machine
Product model: SK - 206-400
To adapt to the range:
PLC, touch screen, the multi-touch screen, mobile phone keys, virtual buttons, computer keys, optical lenses, film, UV curing
Touch screen UV curing glue, suction under UV machine, sheet to ensure that product is not drift;
Technical parameters:
The UV lamp: 6 kw * 2 PCS
Light irradiation (effective width) : 400 mm;
The UV lamp is apart from the conveyer belt distance is adjustable: 50-120 - mm
The UV lamp power density: 120 w/CM
The UV light intensity is adjustable: 50%; 100%;
Reflector: aluminum reflector built-in import reflective aluminum, reflective high efficiency, long service life;
Conveyor width: 400 mm;
In and out of the mouth height; 100 mm
Conveyor belt material: teflon long wangdai;
Conveyor speed: 1-5 m and infinitely adjustable;
Feed side length: 500 mm;
UV for: 800 mm;
The discharge end: 500 mm;
The machine set up automatic delay shutdown functions;
Knurling roller: surface, to ensure smooth delivery;
The engine cooling: air cooling and optical cooling;
The machine material: manufacture plastic-sprayed surface;
Appearance: white with black and white plastic spraying computer;
The machine specification: 2000 * 1550 * 600 w l HMM
Power supply connection: three-phase five line 380 vac 50 hz


TAG:uv(20)